MOTO GUZZI BREVA V1100 Manual page 16

Description
Clock
Temperature
M u l t i f u n c t i o n
Odometer (km/mi)
LCD
display
Trip info TRIP 1 and
2
Mode
Speedometer
Rev counter (rpm)
Fuel level indicator
Antitheft LED
Gear shift indicator LED
" H A Z A R D " E M E R G E N C Y P U S H -
BUTTON
ABS push-button (only for vehicles
equipped with ABS)
HEATED HANDGRIPS PUSH-BUTTON With engine running, press for several seconds to activate handgrips heating. Press briefly to adjust heating.
OPT
16
use and maintenance Breva
Function
Displays time in 12 or 24 hour format. Format is selected via display, see page 17 (MULTIFUNCTION LCD
DISPLAY).
Displays ambient temperature, the value is shown in the top left corner of the display. When temperature is
close to 3° C (37 °F) the ice symbol should be displayed. Range in °C or °F is selected through the display,
see page 17 (MULTIFUNCTION LCD DISPLAY).
Gives total distance covered (in km or miles). Range in km or mi is selected through the display, see page 17
(MULTIFUNCTION LCD DISPLAY).
Gives data concerning Trip 1 and 2, partial distance covered is shown in the middle while at the bottom is one
of the following: Trip time, Fuel consumption, Instant fuel consumption, Maximum speed or Average speed,
see page 17 (MULTIFUNCTION LCD DISPLAY).
In this position access is given to the functions: "Lap timer", "Menu", "Battery voltage". Should the bike be
running and the speed be different from zero, it is impossible to enter the "Menu" function. See page 17
(MULTIFUNCTION LCD DISPLAY).
Indicates road speed.
Indicates engine rpm.
When maximum rpm set is exceeded, the red gear shift light on the instrument panel will come on.
Gives fuel level in the tank. With full tank the index points number one, as soon as the level is decreasing the
index will move down. When the light "
tank. If so, refuel as soon as possible, see page 32 (FUEL).
Indicates that option external antitheft system is available.
Comes on when set rpm are exceeded. Activation threshold can be set through the display, see page 20
(GEAR SHIFT INDICATOR).
Turns on when pressed. It indicates that all four emergency warning lights (turn indicators) are flashing.
For disabling procedure see page 26 (CONTROLS ON THE INSTRUMENT PANEL).
Press again for several seconds to turn heating off. See page 26 (CONTROLS ON THE INSTRUMENT
PANEL).
" comes on, this means that there is less than 5 +- 1
b
of fuel in the