Recall Time - Binatone iDECT V2i System Manual

iDect_V2i_IFU_master.book Page 44 Thursday, March 27, 2008 2:54 PM
Custom settings

Recall time

The default value of the recall (also called Flash) time
that is preset in your handset is correct for most UK
lines, but you may need to change it if you are connected
to a PBX. There are three options available:
(85ms),
1
To set the
M
recall time:
2
d
3
M
4
M
5 :
6
M
7
B
f
44
Medium (default, 100ms) and
Press the MENU/OK button
! The display shows Main Menu
D
Press the button THREE times
! The display shows Main Menu
Press the MENU/OK button
! Display shows Advanced Set
Press the MENU/OK button
! Display shows Recall Time
U D
Use the or button to select Short,
Long.
Press the MENU/OK button
! You will hear a confirmation beep.
Use the BACK button to exit the menu or press
HANG UP to go to standby mode
Short
Long (250ms).
> Phonebook
> Advanced Set
> Recall Time
> Medium
Medium or