The Idect V2I Has A Ren Of 1, And Most Other Telephones Have A Ren Of - Binatone iDECT V2i System Manual

iDect_IFU_00_Symbols on the display.fm Page 1 Monday, March 31, 2008 2:53 PM
Symbols on the display
The time and date
The handset's name
(the default is HANDSET)
What the symbols mean
Signal This flashes while the handset is trying to establish a link to the
base unit. If it flashes while you're on a call, move closer to
level
the base unit.
Voice Mail Flashes when a new voice mail is received. (This is a caller
display service and is not usually available from UK network
providers.)
Intercom call
Flashes while your handset is ringing for an intercom call, and
comes on steadily when the call is connected.
Memory/ Appears when you're in the Phonebook list or menu options.
store
Ringer Appears when the ringer volume is set to zero.
Silenced
Redialling Appears when you are in the Last Number Redial list or menu
options.
Keypad Lock Appears when the keypad is locked.
Battery
When this shows 'nearly empty'
charge
base unit or charger pod to charge the batteries.
While the batteries are being charged, the symbol blinks.
Phone Appears when you have a connection to the outside line.
Flashes when there's an incoming call to be answered
(even if the ringer is turned off).
TAM Appears when the answering machine function is on. Flashes
when a new message is received. (The display also shows "X
New Msg.")
Speakerphone Appears when the speakerphone is turned on.
Help Line: 0845 345 9677
The handset's number (may be 2,
3 or 4 if you have more than one
handset on your iDECT V2i system)
Call Duration.
, put the handset on the
(Local Call rate)
1