Call Screening; To Switch Call Screening On Or Off - Binatone iDECT V2i System Manual

iDect_V2i_IFU_master.book Page 32 Thursday, March 27, 2008 2:54 PM
Answering machine setup

Call Screening

The call screening function allows you to listen to
incoming messages as they are recorded so you can
decide if you would like to take the call.
■ The telephone is supplied with call screening switched
on, but you can switch it off if you want.
■ When call screening is switched on, handset 1
loudspeaker will turn on automatically while the
answering machine is recording an incoming
message.
1
To switch call
M
screening on or
u
off:
2
M
u
3
M
d
4
M
5
u
6
M
7
B
f
32
Press the MENU/OK button ONCE then the
button ONCE
! Display shows Main Menu >
Press the MENU/OK button then
! Display shows Answ. Machine
Press the MENU/OK button ONCE then
TWICE
! Display shows Settings > HS Screening
Press the MENU/OK button
Display shows HS Screening
!
U D
Press the or button to select
Press the MENU/OK button to confirm the
change
Use the BACK button to exit the menu or press
HANG UP to go to standby mode
U
Answ. Machine
U
ONCE
> Settings
D
> Off (or On)
Off or On