Mute A Call; Set The Silent Mode; Redial; Redial A Number From The Redial List - Binatone iDECT Q2i System User Manual

During a call:
Press <UP> or <DOWN> to increase or decrease the volume level respectively.
The current setting is shown.
When you end the call, the volume settings w ill remain at the last selected level.

4.6 Mute a Call

You can talk to someone nearby without letting the caller hear you during a call.
During a call:
P ress <M ute/Left S oft key> to m ute the m icrophone. Y our caller cannot hear you.
P ress <U nm ute/Left soft key>
again to unmute the microphone.

4.7 Set the Silent Mode

In idle, press and hold <#> to turn off the ringer. The "RINGER OFF" icon is displayed on the LCD.

4.8 Redial

The last 20 numbers dialled are saved in the Redial list.
stored a name in the phonebook that matches the number, the name will be displayed instead.
4.8.1

Redial a number from the redial list

1. Press <DOWN> to access the redial list.
2. Press <UP/DOWN> to browse the redial list.
3. Press <TALK ON> to dial to the selected redial number.
Note: If there are no numbers in the redial list, the display shows
4.8.2

Save a redial number into the phonebook

1. Follow steps 1 and 2 in section 4.8.1 .
2. Press <Select> to select the redial number.
3. Press <Menu> and <UP/DOWN> to scroll to Add to PB.
4. Press <Select> and then enter the name, edit the number if necessary and select the melody.
Note: Press <DOWN> after entering the name to go to next step of editing the number, and then
press <DOWN> to go to the final step of selecting the melody. Press <RIGHT> or <LEFT>
to scroll through the melody options. Name and number should be entered in order to save a new
phonebook entry.
5. Press <OK> to save the redial number into the phonebook.
4.8.3

Delete a redial number

1. Follow steps 1 and 2 in section 4.8.2 .
2. Press <Menu> and <UP/DOWN> to scroll to Delete .
3. Press <SELECT> and then<OK> to confirm the Delete.
4.8.4

Delete the entire redial list

1. Follow steps 1 and 2 in section 4.8.2 .
2. Press <Menu> and <UP/DOWN> to scroll to Delete All .
3. Press <SELECT> and then<Select> to confirm the Delete All.

4.9 Keypad Lock

You can lock the keypad so that it cannot be used accidentally while carrying it around.
1. To lock the keypad: In idle mode, press and hold <*> key, the <Keypad lock icon>will display.
2. To unlock the keypad: In idle mode, press and hold <*> key, the <keypad lock icon>
will disappear.

4.10 Find Handset

You can locate the handset by pressing <PAGE> on the base station. All the handsets
registered to the base will
ring up to 60 seconds and "Paging " is displayed on the LCD.
You can stop the --Paging-- by pressing any key on the
handset except <Silent / Right soft key> or pressing <PAGE> on the base.
If you have
List Empty" .
"
11