Relay Timers; Relay Configuration - ACT ACTENTRY A5 Operating And Installation Instructions

ACTentry A5 Operating and Installation Manual

Relay Timers

Relay timers are set in the factory to 5 seconds. Timers may be set to any duration between 2 seconds and 4
minutes.
Step Keypad Entry
1
xxxx
2 2
3 0-1
4
Example: To set Relay 1 time to 10 seconds press:

Relay Configuration

The Output Function code is assigned to a user. For example, one user could be assigned to open Relay 1 and
another user could be assigned to open Relay 2. Default function code is 1 (Relay 1 Timed) for all users (all users
only activate Relay 1).
Output Function Code
0
1(Default)
2
3
When the door is toggled open, this will be indicated by the CALL indicator flashing.
Step Keypad Entry
1
xxxx
2 1
3 0-9
4 0-3
Example: Set User 7 to toggle Relay 1 (open/locked) press:
Example: Set User 6 to open Relay 2 press:
Example: Set User 5 to open Relays 1 and 2 press:
Enter Programming Mode
Set Relay Timers
0 For Relay 1, 1 for Relay 2. {Buzzer sounds indicating timing...wait
required period}
(Stop timing){Buzzer stops – timer set}
Relay 1
Toggled
Timed
Timed
Operation
Enter Programming Mode
Set Outputs
Enter User Number 0-9
Enter 'Output Function Code'
Operation
9999 2 0 ...wait 10 seconds, then
Relay 2
Timed
Timed
Example: set User 7 to toggle the Relay open/locked
Enter Programming Mode
9999
1 Set Outputs
7 User 7
0 Toggled
9999 1 7 0
9999 1 6 2
9999 1 5 3
12
Rev 1.1