GMC YUKON XL 2003 Manual page 433

~~
Rear Position
1500 Series
Rear Position
2500 Series
3. Make sure the jack head is positioned so that the
rear axle is resting securely between the grooves
that are on the jack head. Turn the wheel
wrench clockwise to raise the vehicle. Raise the
4. Remove all the wheel
nuts and take off the
flat tire.
5. Remove any rust or
from the wheel bolts
mounting surfaces
and spare wheel.
dirt
1
vehicle far enough off the ground so there is enough
room for the spare tire to fit back underneath the
rear of the vehicle.
5-80