GMC YUKON XL 2003 Manual page 252

Finding a Station
BAND: Press this button to switch between AM, FM,
FM2, or XMI, XM2 (USA only, if your radio is equipped
with XMTM Satellite Radio Service) or DAB1, DAB2
(Canada only, if your radio is equipped with DAB). The
display will show your selection.
TUNE: Turn this knob to select radio stations.
For DAB (Canada only, if your radio is equipped with
DAB), the TUNE knob allows you to navigate the
DAB frequency range. Turning this knob will tune up
or tune down the range. The radio will display the
letter L with a number next to it (1 through 23). Each L
number refers to a frequency and there can be
multiple stations contained in one frequency. It may also
take a few seconds, once you have tuned to a
frequency, for that frequency to gather all of the stations.
Depending on how many stations are within a
frequency, with every tune up or down, you may be
tuning to another station or to another frequency. The
display will show your selections.
k SEEK >I
: Press the right or the left arrow to go to
the next or to the previous station and stay there.
The radio will seek only to stations that are in the
selected band and oa!y
to
those with a strong signal.
k SCAN > I : Press and hold either SCAN arrow
for two seconds until SC appears on the display and
you hear a beep. The radio will go to a station, play for
a few seconds, then go on to the next station. Press
either SCAN arrow again to stop scanning.
To scan preset stations, press and hold either SCAN
arrow for more than four seconds. PRESET SCAN will
appear on the display. You will hear a double beep.
The radio will go to a preset station stored on your
pushbuttons, play for a few seconds, then go on to the
next preset station. Press either SCAN arrow again
to stop scanning presets.
The radio will scan only to stations that are in the
selected band and only to those with a strong signal.
3-1 01