GMC YUKON XL 2003 Manual page 23

2. Make sure the head restraints have been lowered
3. With the seat folded,
unlatch the seat from
the floor by pulling
up on the lever located
under the carrying
handle at the rear of
the seat labeled 2.
completely.
4. Lift the rear of the seat up, off the floor. You will not
be able to unlatch the seat from the floor unless the
seatback is folded down.
5. Tilt the seat fully forward and secure
it
in place
using the support rod located on the underside
of the seat on the passenger's side. Make sure the
rod pin is fully engaged in the lock.
6. Push and pull on the seat. Make sure the support
rod is holding it firmly in place. Use the seat in this
position only when necessary for additional
cargo space.
To return the seat to the seating position do the
following:
1. Push forward on the seat and release the support
2. Secure the support rod in its stored position on the
3. Lower the seat to the floor and let the seat drop
lock rod.
underside of the seat.
into place.
4. Lift up on the carrying handle to make sure the seat
5. Return the seatback to the upright position by
is locked in place.
pulling up on the release lever labeled 1 before
the back can be folded upright.
6. Pull the seatback forward to make sure
it
is locked
in place.
1-16