GMC YUKON XL 2003 Manual page 269

K.
L.
M.
N.
P.
Q.
S.
Illumination: Press this button to turn the remote
control backlight on.
Menu: Press this button to access the DVD menu
(this button only operates with a DVD).
Enter: Press this button to select items within
a menu.
Return: Press this button to exit the current active
menu and return to the previous menu. This button
will operate only when a DVD is being played
and a menu is active.
Angle: Press this button to call-up a menu that will
operate only when a DVD is being played. The
format and content of this function is defined by the
disc and is dependent of the disc.
Subtitle: Press this button to call-up a menu that will
operate only when a DVD is being played. The
format and content of this function is defined by the
disc and is dependent of the disc.
Fast Forward: Press this button to fast forward the
DVD or CD. To stop fast forwarding, press this
button again. This button may not work when the
DVD is playing the copyright or the previews.
Play/Pause: Press this button to turn the DVD
player on, to start play of a DVD or CD and to toggle
between play and pause of a DVD or CD.
Next TracMChapter: Press this button to advance
to the beginning of the next track or chapter. This
button may not work when the DVD is playing
the copyright or the previews.
Battery Replacement
To change the batteries, do the following:
the bottom of the remote control.
Make sure that they are installed correctly.
1. Remove the battery compartment door located on
2. Replace the two AA batteries in the compartment.
3. Close the battery door securely.
Notice:
Do not store the remote control in heat or
direct sunlight. This could damage the remote
control and it would not be covered by your vehicles
warranty. Keep the remote control stored in a
cool, dry place.
If the remote control is to be stored for a long period of
time, remove the batteries and keep them in a cool,
dry place.
Headphones
The RSE system includes two sets of wireless infrared
headphones.
Each set of headphones have an ON/OFF control. To
use the headphones activate the ON/OFF control.
An indicator light will illuminate on the headphones. If
the light does not illuminate, the batteries may need
to be replaced. See "Battery Replacement'' later in this
section for more information. To turn the headphones
OFF activate the ON/OFF control.
Each set of headphones has a rotary volume control. To
adjust the volume, adjust this control.
3-1 18