GMC YUKON XL 2003 Manual page 272

Problem
No power.
Disc will not play.
The picture does not fill
the screen. There are
black borders on the top
and bottom or on both
sides or it looks
stretched out.
The disc was ejected, but
it was pulled back into
the DVD player.
Recommended Action
The ignition might not be
in on or accessory.The
parental control button
might have been pressed.
(The power indicator light
will flash.)
The system might be off.
The parental control
button might have been
pressed. (The power
indicator light will flash.)
The system might be in
auxiliary source mode.
Press the SRCE button
to toggle between the
DVD player and the
auxiliary source.The disc
is upside down or
is
not
compatible.
Press the Display
button on the DVD
player or on the remote
control. Change the
display mode.
The disc is being stored
in the DVD player. Press
the eject button again to
eject the disc.
Problem
In auxiliary mode, the
picture moves or scrolls.
The language in the audio
or on the screen is wrong.
The remote control does
not work.
Recommended Action
Check the signal coming
from the auxiliary device
and make sure that the
connection and the signal
is good.Change the Video
Format to PAL or NTSC.
See "Stereo RCA Jacks"
previously for how to
change the video format.
Press the Menu button on
the DVD player or on the
remote control and
change the audio or
language selection on the
DVD menu.
Point the remote control
directly at the infrared
window below the video
screen while using.Check
that the batteries are not
dead or put in wrong.The
parental control button
might have been pressed.
(The power indicator light
will flash.)
3-1 21