Using Hp 3D Driveguard Software - HP 2230s - Notebook PC Hardware Manual

Using HP 3D DriveGuard software

The HP 3D DriveGuard software enables you to perform the following tasks:
●
Enable and disable HP 3D DriveGuard.
NOTE:
DriveGuard. Additionally, members of an Administrator group can change the privileges for non-
Administrator users.
●
Determine whether a drive in the system is supported.
To open the software and change settings, follow these steps:
1. In Mobility Center, click the hard drive icon to open the HP 3D DriveGuard window.
– or –
Select Start > Control Panel > Hardware and Sound > HP 3D DriveGuard.
2. Click the appropriate button to change settings.
3. Click OK.
Depending on your user privileges, you may not be able to enable or disable HP 3D
Using HP 3D DriveGuard software 15