Removing The Heatspreader - Compaq 12XL125 - Presario - K6-2 533 MHz Maintenance & Service Manual

Removing the Heatspreader

To remove the Heatspreader, complete the following steps:
1. Prepare the Notebook for disassembly
2. Remove the Palmrest Cover with TouchPad
3. Remove the keyboard
4. Remove four screws
Note: Positions of screws are numbered on the Heatspreader.
To replace the Heatspreader, reverse the previous procedures.
Note: If the thermal pads on the Heatspreader are missing or damaged, a new
Heatspreader should be installed.
Important: Before installing the new Heatspreader, remove the plastic covering
from the thermal pads.
Å
To prevent damage, do not use excessive force when replacing the screws.
P N M
RESARIO OTEBOOK AINTENANCE AND
Presario 1200XL Series
Model XL300, XL300A, and XL300B
(pg
(pg 16).
1
from the Heatspreader and lift it
S G 1200XL S
ERVICE UIDE ERIES
9).
(pg 14).
2
out of the chassis.
R S 17
EMOVAL EQUENCE