Setting Up The Quickdock; Step 1: Connect To Ac Power; Step 2: Connect The Computer - HP KN744AA - Notebook QuickDock Port Replicator User Manual

Setting up the QuickDock

Step 1: Connect to AC power

WARNING!
Plug the power cord into an AC outlet that is easily accessible at all times.
Disconnect power from the product by unplugging the power cord from the AC outlet.
If provided with a 3-pin attachment plug on the power cord, plug the cord into a grounded (earthed) 3-
pin outlet. Do not disable the power cord grounding pin, for example, by attaching a 2-pin adapter. The
grounding pin is an important safety feature. It is possible to receive an electric shock from a system
that is not properly grounded.
To ensure the correct performance of all QuickDock features, connect the QuickDock to an AC power
source using the computer AC adapter and power cord.
1. Connect the computer AC adapter to the appropriate QuickDock power connector (1):
● Connect the computer smart AC adapter to power connector 1.
– or –
●
Connect the computer standard AC adapter to power connector 2.
2. Connect the AC power cord to the AC adapter (2).
3. Connect the AC power cord to the AC outlet (3).

Step 2: Connect the computer

To connect the computer to the QuickDock:
1. Press and hold the buttons on the sides of the expansion cable (1).
To reduce the risk of electric shock or damage to your equipment:
Setting up the QuickDock 5