Connecting To A Network - HP KN744AA - Notebook QuickDock Port Replicator User Manual
Hp quickdock 2.0 docking station - user guide
Hide thumbs
Also See for KN744AA - Notebook QuickDock Port Replicator:
- Quick setup (2 pages) ,
- User manual (43 pages) ,
- Maintenance and service manual (42 pages)
Table of Contents
Advertisement
Connecting to a network
NOTE:
To communicate using the modem on your computer and an analog telephone line, connect
one end of a modem cable to the RJ-11 (modem) jack on your computer and the other end to an RJ-11
telephone jack. Refer to your computer user guide for more information.
You can connect your computer through the QuickDock to a network. This requires an Ethernet cable
(purchased separately).
NOTE:
The RJ-45 (network) jack on the computer is disabled when the computer is connected to the
QuickDock.
1.
Connect the QuickDock to your computer.
2.
Connect one end of the Ethernet cable to the RJ-45 (network) jack on the QuickDock (1) and the
other end to a RJ-45 wall jack (2) or router.
10
Chapter 2 Using the QuickDock
Advertisement
Table of Contents
Need help?
Do you have a question about the KN744AA - Notebook QuickDock Port Replicator and is the answer not in the manual?
Questions and answers