Connecting Audio; Connecting Analog Audio Devices; Connecting Digital Audio Devices - HP KN744AA - Notebook QuickDock Port Replicator User Manual

Connecting audio

NOTE: Do not connect more than one audio device to the QuickDock.

Connecting analog audio devices

To connect analog audio:
1. Connect one end of an audio Y-cable (purchased separately) to the headphone jack on the right
side of the QuickDock (1).
2. Connect the other end to the red and white audio-in jacks on your television or stereo equipment
(2). Refer to your television or stereo equipment user guide for the jack names and locations.

Connecting digital audio devices

The QuickDock provides an S/PDIF digital audio jack for an optional digital audio connection. A coaxial
digital audio cable (purchased separately) and an audio receiver (television or stereo) with a coaxial
digital audio port is required to fully enable this feature.
To connect digital audio:
1. Connect a coaxial digital audio cable (purchased separately) to the orange S/PDIF digital audio
jack on the back of the QuickDock (1).
Connecting audio 13