Connecting To A Vga Display Device - HP KN744AA - Notebook QuickDock Port Replicator User Manual

Connecting to a VGA display device

The QuickDock can also be connected to an external VGA display device, such as a monitor or a
projector, through the external monitor port.
NOTE: The external monitor port on the computer is disabled when the computer is connected to the
QuickDock.
To connect an external VGA display device:
1. Connect the device cable to the external monitor port on the back of the QuickDock.
2. Press fn+f4
device.
NOTE:
NOTE:
not close the computer display while the computer is connected to an external display device. You
can modify lid switch settings through the computer power options.
12 Chapter 2 Using the QuickDock
on the computer one or more times to switch the screen image to the external display
To use extended display, refer to the operating system display settings of the computer.
If the computer lid switch is set to initiate standby or Sleep when the display is closed, do