6270 "Arming" Screen - ADEMCO 6270 - TouchCenter Keypad User Manual

About the 6270 (cont'd)

6270 "Arming" Screen

From the "Home" screen, press SECURITY to access the 6270
"Arming" screen. Use this picture and the table that follows to
become familiar with the 6270 security functions.
ITEM
AWAY Press this button to arm when no one will be staying on the
premises. When armed in AWAY, the system will sound an
alarm if a protected door or window is opened, or if any
movement is detected inside the premises. You may leave
through the entrance door during the exit delay period without
causing an alarm. You may also re-enter through the entrance
door, but must disarm the system with your User Code within
the entry delay period or an alarm will occur.
STAY Press this button to arm when you are staying home, but might
expect someone to use the entrance door later.
When armed in STAY, the system will sound an alarm if a
protected door or window is opened, but you may otherwise
move freely throughout the premises. Late arrivals can enter
through the entrance door without causing an alarm, but they
must disarm the system within the entry delay period or an
alarm will occur.
Press this button to arm when you are staying home and do not
NIGHT
expect anyone to use the entrance door. Your installer may
have configured NIGHT Mode differently; have him/her describe
the actual settings of this mode.
8
FUNCTION