Table of Contents
Advertisement
Figure 4-6 Device Manager post Windows 2000 Server installation.
When the Windows 2000 Server installation has completed, you should perform
the updates listed below. The order of these updates is not critical, but we
recommend that you install the latest Windows 2000 Server Service Pack prior to
installing the device drivers.
1. Install or update the ServeRAID adapter driver.
Important: ServeRAID device drivers should be at the same level as the
installed ServeRAID firmware and BIOS.
2. Install the driver for the onboard Broadcom NetXtreme Gigabit Ethernet
adapter.
To perform this update open Device Manager, right-click Ethernet Controller
under Other devices, select Properties, select the Drivers tab then click the
Update Driver button. Follow the steps in the Upgrade Device Driver wizard,
using the downloaded driver files extracted to a floppy disk.
116
IBM ^ xSeries 440 Planning and Installation Guide
Broadcom Gigabit Ethernet controller
IBM Remote Supervisor Adapter
IBM Active PCI controller
Advertisement
Table of Contents
