Chapter 2. Installing Options; Handling Static-Sensitive Devices; Installing External Options - IBM 8183 - ThinkCentre S50 User Manual

Chapter 2. Installing options

This chapter provides instructions for installing optional memory, PCI adapters,
drives, and security features. When installing an option, use these instructions
along with the instructions that come with the option. Use these procedures also if
you are replacing any of these options as a customer replaceable unit (CRU). See
Appendix A, "Replacing customer replaceable units (CRU)," on page 29 for other
CRUs.

Handling static-sensitive devices

Static electricity, although harmless to you, can seriously damage computer
components and options.
When you add an option, do not open the static-protective package containing the
option until you are instructed to do so.
When you handle options and other computer components, take these precautions
to avoid static electricity damage:
v Limit your movement. Movement can cause static electricity to build up around
v Always handle components carefully. Handle adapters and memory modules by
v Prevent others from touching components.
v When you install a new option, touch the static-protective package containing
v When possible, remove the option and install it directly in the computer without
v Do not place the option on the computer cover or other metal surface.

Installing external options

This section shows the various external connectors on your computer to which you
can attach external options, such as external speakers, a printer, or a scanner. For
some external options, you must install additional software in addition to making
the physical connection. When adding an external option, use the information in
this section to identify the required connector, and then use the instructions that
come with the option to help you make the connection and install any software or
device drivers that are required for the option.
© Copyright IBM Corp. 2004
Important
Before you install or remove any option, read "Important safety information"
on page v. These precautions and guidelines will help you work safely.
you.
the edges. Never touch any exposed circuitry.
the option to a metal expansion-slot cover or other unpainted metal surface on
the computer for at least two seconds. This reduces static electricity in the
package and your body.
setting the option down. When this is not possible, place the static-protective
package that the option came in on a smooth, level surface and place the option
on it.
7