Removing The Microprocessor - IBM 8183 - ThinkCentre S50 User Manual

Removing the microprocessor

Attention: If your computer has been turned off for a long period of time the
thermal grease between the microprocessor heat sink and the microprocessor might
not allow them to be separated easily. In this case turn on your computer for a few
minutes to soften the grease.
To remove the microprocessor, do the following:
1. Turn off the computer and disconnect the power cord from the electrical outlet
2. Open the cover. See "Opening the cover" on page 10.
3. Rotate the drive bay assembly upward to gain access to the microprocessor.
36
User Guide
Important
Before you install or remove any component, read "Important safety
information" on page v. These precautions and guidelines will help you work
safely.
and from the computer.