Table of Contents
Advertisement
Figure 2. Removing the front bezel
3. To reinstall the front bezel, align the plastic tabs on the right side of the front bezel with the corresponding
holes in the chassis. Then, pivot the front bezel inward until it snaps into position on the left side.
Note: If you have completely removed the front bezel off the chassis, you need to first route and connect
the power switch/LED assembly cable.
Figure 3. Reinstalling the front bezel
4. Go to "Completing the FRU replacement" on page 84.
.
Chapter 8
Replacing FRUs (Type 0841)
69
Advertisement
Table of Contents
