Dodge 2009 Ram 1500 Owner's Manual page 268

266 STARTING AND OPERATING
Driving in the 4WD LOCK and 4WD LOW positions on
dry hard surfaced roads may cause increased tire wear
and damage to the driveline components.
NEUTRAL Button
NOTE: The transfer case NEUTRAL position is selected
by depressing the recessed button located on the lower
left hand corner of the 4WD Control Switch. The transfer
case NEUTRAL position is to be used for recreational
towing only. Refer to "Recreational Towing" in this
section for specific procedures on shifting into and out of
NEUTRAL.
Transfer Case Position Indicator Lights —
Electronically Shifted Transfer Case Only
The "Transfer Case Position Indicator Lights" are located
on the instrument cluster and indicate the current and
desired transfer case selection. When you select a differ-
ent transfer case position, the "Transfer Case Position
Indicator Lights" will do the following:
If all shift conditions are met:
1. The current "Transfer Case Position Indicator Light"
will turn OFF.
2. The selected "Transfer Case Position Indicator Light"
will flash until the transfer case completes the shift.