Dodge Caliber 2009 Specification

Note: Information shown is based on data available at time of publication (September 1, 2009).
Specifications are valid for Europe and may vary in other international markets. Vehicle model availability
may change per individual markets.
Dodge Caliber

SPECIFICATIONS

Dimensions are in millimeters (inches) unless otherwise noted.
GENERAL INFORMATION
Body Style
Assembly Plant
Vehicle Class
ENGINE: 2.2-LITER COMMON-RAIL DIESEL (CRD) DOHC 16-VALVE
Availability
Type and Description
Displacement
Bore x Stroke
Valve System
Fuel Injection
Construction
Compression Ratio
Power
Torque
Max. Engine Speed
Fuel Requirement
Oil Capacity
Coolant Capacity
Emission Controls
Emission Class
Fuel Consumption
Urban Cycle
Ex-urban Cycle
Combined Cycle
CO2 (combined)
Information is current as of September 1, 2009
Five-door hatchback
Belvidere, Illinois
C-Segment
Available on all Caliber models
Four cylinders in-line, turbocharged, high-pressure, direct injection
2143 cu. cm (130.77 cu. in.)
83 x 99 mm (3.27 x 3.90 in.)
Chain Driven DOHC, 16-valve
Electronically controlled Delphi common rail system with high pressure
direct injection solenoid injectors
Cast-iron block, cast aluminum cylinder head, forged steel crankshaft
16.2:1
120 kW (163 hp DIN) 3600 – 4200 rpm (74.0 hp DIN/L)
320 N•m (236 lb.-ft.) @ 1400 – 3600 rpm
5200 rpm (electronically limited)
49 cetane diesel, DIN EN590
6.5 L (6.9 qt.) with dry filter
9.35 L (9.9 qt.)
Oxy-catalyst with Downstream Diesel-particulate Filter (DPF) and
cooled Exhaust-gas Recirculation (EGR)
Euro V
TBD L/100 km
TBD L/100 km
5.8 L/100 km (estimated)
TBD g/km
5
CALIBER
www.media.chrysler.com