Tail Lights, Rear Turn Signals And Backup Lights; License Lights - Dodge 2009 Caliber SRT4 Owner's Manual

3. Pull bulb off connector.

Tail Lights, Rear Turn Signals and Backup Lights

1. Remove the two push-pins from the tail light housing.
2. Grasp the tail light and pull firmly to disengage the
light from the aperture panel.
MAINTAINING YOUR VEHICLE 357
3. Twist and remove socket from light.
4. Remove the bulb from the socket and replace.

License Lights

1. Use a screw driver to gently pry against the side of the
snap tab to remove the lamp from the liftgate.
7