Getting Started - Nintendo RVLRRFPE Instruction Booklet

Getting Started

Please insert the Wii Fit Plus Game Disc in the Wii
console disc slot. Turn the power ON.
When the screen on the right appears,
1
read the contents and press
From the Wii Menu, point to the Disc
2
Channel (shown in the
press .
* You can do the Body Test and track your
daily progress without inserting the Game
Disc. Please see
P. 16
Fit Plus Channel.
When the Channel Preview screen
3
appears, point to START and press
When the Wrist Strap Usage screen
4
appears, attach the wrist strap as
instructed, point to START, and press
If you are playing for the first time, the
5
Wii Fit Plus save-data creation screen
will appear. Press
data. Once save data has been created,
a confirmation screen will appear. Press
once again.
To play this game in English, change your
language settings in the Wii System Settings.
7
.
red box) and
for details on the Wii
Wii Fit Plus Channel
.
Channel Preview Screen
.
Wrist Strap Usage Screen
to create your save
Save-Data Creation Screen
Registering your Wii Balance Board
With Wii Fit Plus, you will use the Wii Balance Board to perform the
Body Test as well as many of the activities and exercises.
•
Wii Balance Board is Registered
If you have already registered your Wii
Balance Board, simply turn the power ON
when the screen on the right appears.
•
Wii Balance Board is Not Registered
In order to register your Wii Balance Board,
please follow these steps.
• Remove the battery cover from the back
of the Wii Balance Board, and press
The Power LED will flash.
* When removing the battery cover, be careful not to
drop the Wii Balance Board on your feet or pinch
your fingers.
* Please check to make sure that the batteries are
inserted correctly.
• Open the SD Card Slot Cover on the Wii
system while the Power LED on the Wii Balance Board is flashing, and
press . When the Power LED on the Wii Balance Board stops
flashing, the Wii Balance Board has been successfully registered.
* Please do not press for longer than 10 seconds. Doing so will erase all
Wii Remote controllers that are registered to your Wii system.
• Close the SD Card Slot Cover on the Wii system, and replace the
battery cover on the Wii Balance Board.
* Only one Wii Balance Board can be registered to a single Wii system, and a
maximum of 10 balance board and Wii Remote combinations can be registered. If
an 11th unit is registered, the oldest Wii Remote data will be erased, and it will no
longer be synced. However, the data on the Wii Balance Board will not be erased.
* Only one Wii Balance Board may be registered to one Wii system. If a Wii
Balance Board that is already registered to a Wii system is registered to another
Wii system, the previous settings will be erased. In order to be used with the first
Wii system, you will need to register it once again.
* The Wii Balance Board will be registered as Player 4. If a Wii Remote is
registered as Player 4, this registration will be overwritten.
.
8