The following example shows two lines drawn with relative polar coordinates.
In each illustration, the line begins at the location labeled as the previous
point.
Command: line
From point: @3<45
To point: @5<285
Enter Polar Coordinates
To enter absolute polar coordinates (2D)
At a prompt for a point, enter coordinates in the tooltip using the following
format:
#distance<angle
If dynamic input is turned off, enter coordinates on the command line
using the following format:
distance<angle
To enter relative polar coordinates (2D)
At a prompt for a point, enter coordinates using the following format:
@distance<angle
Enter 3D Coordinates
Cartesian, cylindrical, or spherical coordinates locate points when you are
creating objects in 3D.
Use Precision Tools | 139