Control The Draw Order Of Hatches And Fills; Modify Hatches And Fills - Autodesk 057B1-41A111-1001 - AutoCAD LT 2010 User Manual

Trim an existing hatch to objects that cross the edges of the hatch. After
trimming, erase the objects.
Define hatch boundary points with the Draw option of the -HATCH
command.
To hide a hatch's boundary objects, assign the boundary objects to a different
layer than the hatch object, and then turn off or freeze the layer of the
boundary objects. This method maintains hatch associativity.
See also:
Reshape a Hatch or Fill

Control the Draw Order of Hatches and Fills

Specify the draw order for a hatch object to control whether it is displayed
behind or in front of the hatch boundary, or behind or in front of all other
objects.
This behavior is controlled by the HPDRAWORDER system variable.
In drawings that contain many hatch objects, use the HATCHTOBACK
command to display all hatch objects behind all other objects.

Modify Hatches and Fills

Modify hatch properties and boundaries, or re-create the boundaries hatch
objects.
326 | Chapter 9 Annotate Drawings
(page 328)