Dodge 2008 Challenger SRT8 Owner's Manual page 342

Dodge 2008 challenger srt8 owner's manual
Table of Contents

Advertisement

340 MAINTAINING YOUR VEHICLE
11. Reinstall the bulb and socket assembly into the tail
light assembly, and then turn it clockwise.
12. Reinstall the tail light assembly, fasteners, electrical
connector, and trunk liner.
13. Close the trunk.
Center Tail/Backup Light
See your authorized dealer for bulb replacement.
Center High-Mounted Stop Light (CHMSL)
The CHMSL uses LED lights that are not serviceable
separately. The CHMSL must be replaced as an assembly,
see your authorized dealer.
License Light
1. Remove the screws securing the light to the rear fascia.
2. Remove the bulb and socket assembly.
3. Disconnect the bulb from the socket assembly and
install the replacement bulb.
1 — License Light Bulb
2 — Socket
4. Reinstall the bulb and socket assembly.
5. Reattach the light to the rear fascia, and then install the
screws.

Advertisement

Table of Contents
loading

This manual is also suitable for:

2008 lc22 challenger srt8Challenger srt8 2008

Table of Contents