Bluetooth Telephone - Pioneer MVH-P7300 Operation Manual

Rds media center receiver
Hide thumbs Also See for MVH-P7300:
Table of Contents

Advertisement

Available languages

Available languages

Operating this unit
Note
When the USB or SD source is selected, this unit
cannot view still images on USB/SD as a
slideshow.

Bluetooth Telephone

This function is available only for MVH-
P8300BT.
For details on basic operations after connect-
ing to a cellular phone, refer to Using Blue-
tooth telephone on page 13.
! PIN code is set to 0000 as the default. You
can change this code. Refer to PIN Code
(PIN code input) on the next page.
Connection menu operation
Important
Be sure to park your vehicle in a safe place and
apply the parking brake when performing this op-
eration.
1
Display the phone menu.
Refer to Basic menu operations on page 12.
2
Use M.C. to select Connection.
Turn to change the menu option. Press to se-
lect.
3
Turn M.C. to select the function.
After selecting, perform the following proce-
dures to set the function.
Device List (connecting or disconnecting a cellular
phone from the device list)
1 Press M.C. to display the setting mode.
2 Turn M.C. to select the name of a device you want
to connect.
3 Press and hold M.C. to switch the Bluetooth de-
vice address and device name.
4 Press M.C. to connect the selected cellular
phone.
While connecting, the circular indicator flashes.
To complete the connection, check the device
name (MVH-P8300BT) and enter the PIN code on
your cellular phone. If the connection is estab-
lished, a circular indicator appears next to the de-
vice name.
Delete Device (deleting a cellular phone from the de-
vice list)
Section
03
29
En

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mvh-p8300bt

Table of Contents