Bluetooth Telephone; Phone Menu; Basic Operations - Pioneer DEH-X8700DAB Operation Manual

Bluetooth telephone

First, make a Bluetooth connection with the Bluetooth telephone (page 10). Up to two
Bluetooth telephones can be connected simultaneously.
Important
• Leaving the unit on standby to connect to your phone via Bluetooth while the engine is not running
can drain the vehicle's battery.
• Be sure to park your vehicle in a safe place and apply the parking brake before operation.
To make a phone call
1
Press to display the phone menu.
When two phones are connected, a phone name appears then a phone menu will be
displayed. To switch to another phone, press
2
Turn the M.C. dial to select [Missed calls], [Dialled calls], [Received calls] or
[PhoneBook], then press to confirm.
3
Turn the M.C. dial to select a name or phone number, then press to confirm.
The phone call starts.
To answer an incoming call
1
Press when a call is received.
TIP
When two phones are connected to the unit via Bluetooth and there is an incoming call while one
phone is being used for a call, a message will appear in the display. To answer that incoming call, you
need to end the current call.

Basic operations

Purpose Operation
End a call Press
Reject an incoming call Press and hold
Switch between the current caller Press the M.C. dial.
and a caller on hold
Cancel a caller on hold Press and hold
Adjust the volume of the caller's Turn the M.C. dial during the call.
voice (When private mode is on,
this function is not available.)
Turn the privacy mode on or off Press BAND/
again.
.
when a call is received.
.
during the call.
Voice recognition (Only for iPhone)
This function is only available when an iPhone equipped with voice recognition is
connected to the unit via Bluetooth.
1
Press and hold the M.C. dial to activate the voice recognition mode.
2
Press the M.C. dial and then talk into the microphone to input voice commands.
To exit the voice recognition mode, press BAND/
NOTE
For details on the voice recognition features, refer to the manual supplied with your iPhone.

Phone menu

Menu Item Description
Missed calls Display the missed call history.
Dialled calls Display the dialed call history.
Received calls Display the received call history.
PhoneBook*1 Display the contacts which have been transferred from your
phone. Set [Visibility] in the connection menu to [ON] to browse
the contacts via this unit.
Phone Function Select [ON] to answer an incoming call automatically.
Auto answer*2:
[ON], [OFF]
Ring tone: Select [ON] if the ring tone does not come out from the car
[ON], [OFF] speakers. Depending on the connected phone, this function
may not work.
PH.B.Name view Invert the order of names in the phone book (name view).
*1 The contacts on your phone will normally be transferred automatically when the phone is
connected. If they are not, use your phone to transfer the contacts.
*2 If two phones are connected, this function does not work on incoming calls that are received while
one of the phones is being used for a call.
.
En
11