Available Accessories - Pioneer MVH-P7300 Operation Manual

Section
05

Available accessories

HD Radioä tuner
This HD Radio Ready receiver is ready to receive
HD Radio broadcasts when connected to the
HD Radio tuner (e.g. GEX-P20HD), sold sepa-
rately.
For details concerning operation, refer to the HD
Radio tuner's operation manual.
Basic operations
D/Aauto
3
1 Indicator display area
Refer to Indicator list on page 50.
2 Text information area
! Call sign—artist name—song title—pro-
gram type
! Band/Preset number/Frequency indica-
tor
3 Source image display
Operations are the same as those of the tuner.
(Refer to Basic operations on page 15.)
Storing and recalling stations
Operations are basically the same as those of
the tuner. (Refer to Storing and recalling sta-
tions for each band on page 15.)
However, the band selection method is differ-
ent from that of the tuner.
Selecting a band
1 Push M.C. down.
42
En
1
16:54
HD Seek A-EQ
Text
FM1 1 87.9
P.CH MHz
2 2 2
Using iTunes tagging
The operation is the same as that of the tuner.
(Refer to Using iTunes tagging on page 15.)
Function settings
1 Press M.C. to display the function
menu.
2 Turn M.C. to select the function.
After selecting, perform the following proce-
dures to set the function.
BSM (best stations memory)
1 Press M.C. to turn BSM on.
To cancel, press M.C. again.
Local (local seek tuning)
1 Press M.C. to display the setting mode.
2 Turn M.C. to select Local.
3 Press M.C. to turn Local on or off.
4 Turn M.C. and press to select Level.
5 Turn M.C. to select the desired setting.
FM: Off—Level1—Level2—Level3—Level4
AM: Off—Level1—Level2
The highest level setting allows reception of only
the strongest stations, while lower levels allow the
reception of weaker stations.
Seek Mode (seek mode)
Seek tuning setting can be changed between digital
station seek (Seek HD) and analog station seek (Seek
All) depending on the reception status.
1 Press M.C. to select your favorite setting.
Seek All—Seek HD
Blending (reception mode)
If the reception for a digital broadcast becomes poor,
this unit automatically switches to the analog broad-
cast of the same frequency. If this function is set to
D/A Auto, the tuner switches between digital broad-
cast and analog broadcast automatically. If this func-
tion is set to Analog, the tuner will only receive
analog broadcasts.
1 Press M.C. to display the setting mode.
2 Turn M.C. to select a desired mode.
D/A Auto—Analog