Using the external unit (EXT1, EXT2)
Operate the external unit
by using "Function1" —
"Function4"
The external unit can be operated by transmit-
ting the operating commands set to
Function1 — Function4.
Display the "Function Menu" screen.
1
= For details, refer to Screen switching over-
view on page 70.
2
Turn MULTI-CONTROL until the desired
setting appears in the display.
3
Press the center of MULTI-CONTROL to
set.
p The operating commands set to Function1
— Function4 vary depending on the exter-
nal unit.
p Some functions may not be used until you
touch and hold the key.
Chapter
23
101
En