Using The Hd Radio (Digital Radio); Storing And Recalling Broadcast Frequencies; Storing The Strongest Broadcast Frequencies; Tuning In Strong Signals - Pioneer AVIC U310BT - Navigation System With CD player Operation Manual

Using the HD Radio (Digital Radio)

Pressing and holding MULTI-CONTROL
left or right
The tuner will scan the frequencies until a
broadcast strong enough for good reception is
found.
p You can cancel seek tuning by pressing
MULTI-CONTROL left or right.
Pressing the center of MULTI-CONTROL
The function select screen appears.
Storing and recalling
broadcast frequencies
With a touch of any of the preset tuning keys
( to ), you can easily store up to six broad-
cast frequencies for later recall (also with the
touch of a key).
1 When you find a frequency that you
want to store in memory, keep touching a
preset tuning key
number (e.g., P.CH1) stops flashing.
The selected radio station has been stored in
memory.
2 Touch the same preset tuning key
.
The radio station frequencies are recalled from
memory.
Storing the strongest
broadcast frequencies
"BSM" (best stations memory) lets you auto-
matically store the six strongest broadcast fre-
quencies under the preset tuning keys
and, once stored there, you can tune in to
these frequencies with the touch of a key.
Display the "Function Menu" screen.
1
= For details, refer to Screen switching over-
view on page 70.
2 Turn MULTI-CONTROL to display
"BSM".
to until the preset
to
to
3 Press the center of MULTI-CONTROL to
start "BSM".
BSM begins to flash. While BSM is flashing,
the six strongest broadcast frequencies will be
stored under the preset tuning keys
order of their signal strength. When this is
complete, BSM stops flashing.
p To cancel the storage process, press the
center of MULTI-CONTROL again.
p Storing broadcast frequencies with BSM
may replace broadcast frequencies you
have already saved by using

Tuning in strong signals

Local seek tuning allows you to tune in only
those radio stations with sufficiently strong
signals for good reception.
Display the "Function Menu" screen.
1
= For details, refer to Screen switching over-
view on page 70.
2 Turn MULTI-CONTROL to display
"Local".
3 Pressing the center of MULTI-CONTROL
switches between on and off.
4 Press MULTI-CONTROL left or right to
set the sensitivity.
There are four levels of sensitivity for FM and
two levels for AM:
FM: Level1 — Level2 — Level3 — Level4
AM: Level1 — Level2
p The FM "4" (AM "2") setting allows recep-
tion of only the strongest stations, while
lower settings let you receive weaker
stations.

Switching the seek mode

You can select the method of seek tuning.
Display the "Function Menu" screen.
1
= For details, refer to Screen switching over-
view on page 70.
Chapter
16
to in
to .
77
En