Adjusting The Screen Brightness; Turning Off The Screen; Restoring The Default Setting; Returning The Navigation System To The Initial State - Pioneer AVIC U310BT - Navigation System With CD player Operation Manual

Chapter
11 Modifying the general settings for navigation functions
Adjusting the screen
brightness
You can set the screen brightness for each of
the following situations.
! When the detachable device is attached to
the head unit and the vehicle lights are off.
! When the detachable device is attached to
the head unit and the vehicle lights are on.
! When the detachable device is not at-
tached to the head unit.
Display the "Navigation Menu" screen.
1
2 Touch [Settings].
The "Settings Menu" screen appears.
3 Touch [Brightness].
The "Brightness" screen appears.
4 Touch [+] or [–] to adjust the brightness.
Each time you touch [+] or [–] increases or de-
creases the level. 10 to 0 is displayed as the
level is increased or decreased.
5 Touch [OK].
The adjustment is completed.

Turning off the screen

By turning off the backlight of the LCD screen,
you can turn off the screen display without
turning off the voice guidance.
Display the "Navigation Menu" screen.
1
2 Touch [Settings].
The "Settings Menu" screen appears.
3 Touch [Screen Off].
The screen is turned off.
p Touch anywhere on the screen to turn it
back on.
64
En

Restoring the default setting

Resets various settings registered to the navi-
gation system and restores them to the default
or factory settings.
= For more detailed information about the
items which would be erased, refer to Set-
ting items to be deleted on page 111.
Display the "Navigation Menu" screen.
1
2 Touch [Settings].
The "Settings Menu" screen appears.
3 Touch [F. Reset].
The message confirming whether to restore
the settings appears.
4 Touch [Yes].
Returning the navigation
system to the initial state
You can return settings or recorded content to
the default or factory settings.
= For more detailed information about the
items which would be erased, refer to Set-
ting items to be deleted on page 111.
1 Press the RESET button.
The navigation system restarts, and the splash
screen appears.
2 Wait about 10 seconds, and then press
and hold the MODE button until the "Date/
Setting Clear" screen appears.
The "Date/Setting Clear" screen appears.
3 Touch [Clear user information].
Touching [Clear user information] displays
the confirmation message for clearing the
memory.
# Touch [Reset].
Various settings registered to the navigation sys-
tem is reset to the default or factory settings.
4 Touch [Yes].
The recorded contents are cleared.