Chapter 1 - System Configuration
Before using the CRW44 16S, make sure that you have all of the items
on the list of included items.
In Order to use the CRW4416S, you will require the following.
Computer
The following operating environment is required:
CPU (in Order to write at 4x Speed), or a 100 MHz or faster 486 CPU
(in Order to write at 2x Speed)
A vacant slot in which to install a SCSI card or a pre-installed SCSI
l
A vacant half-height bay
l
Windows 95, Windows 98, Windows NT4.0 or Higher
l
l
Note: You will need about twice us
required by the data you wish to write to CD-ROM.
SCSI card
This is required in Order to connect a SCSI device (the Yamaha
We recommend the following:
Software
Use writing Software or packet writing Software which supports the
CRW44 16s.
Chapfer 1 - System Configuration
3