Yamaha CRW4416S - CRW - CD-RW Drive User Manual page 16

Chapter 2 - Installing the Yamaha CßW4416S Drive
7. Connect the SCSI flat cable.
Connect the 50-pin SCSI flat cable to the SCSI card and to the SCSI
Position the connector so that the colored line is at pin 1 (your lower right).
8. Connect the AUDI0 cable.
Connect the Single 4-pin connector (Sound Blaster compatible) to the
Connect the 4-pin connector at the other end of the cable (the larger
connector) to the AUDI0 OUT connector on the CRW4416S drive.
The polarizing lug should be at the top.
10