Teac CD-W540E User Manual page 12

Front Panel
LED indicators: The drive features two LED indicator lights on the front
panel. Various operations are indicated as per the following table:
Operation
At tray loading
At tray eject
During write/erase
During audio play
During seek/data transfer
Note: The right LED continues to flash as Windows continuously checks
for a disc inside the CD-RW drive. This flashing is part of normal
operation.
emergency eject mechanism: If the eject button fails, you can turn off the
power to the CD-RW drive and insert a small, thin rod (such as a straightened
paper clip) into the emergency eject mechanism opening and press firmly to
eject the disc.
Caution: Do not attempt to use the emergency eject mechanism when
either the Power or Busy indicator is lit or you may seriously
damage the disc or the CD-RW Drive.
eject button: Press this button to open or close the disc tray. (Some CD-ROM
titles disable the manual eject button and rely on software commands to eject
the disc. Refer to the documentation for these titles for more information.)
4
Right LED
green LED flashes
green LED flashes
off
green LED flashes
green LED lights
Left LED
off
off
green LED flashes
off
off
TEAC CD-RW User's Manual