Option Menu Setting - Alpine CDE-133BT Owner's Manual

Option Menu Setting

You can quickly adjust the setting items relevant to the current SOURCE
by using Option Menu.
1
Press and hold ENTER/OPTION for at least 2 seconds
to activate the Option menu of the current source.
Note
• The option menu varies depending on the source.
2
Turn the Rotary encoder to select the desired setting
item, and then press ENTER.
3
Turn the Rotary encoder to change the setting, and then
press ENTER.
After the setting, the display will return to the current source
automatically.
 Setting item:
TUNER mode:
*1
VOL LV ADJ
DISC mode:
*2 *1
 VOL LV ADJ
CD SET
USB mode:
*1
VOL LV ADJ
iPod mode:
*3 *4
 iPod SET
iPod CONT
AUX mode:
*5
 VOL LV ADJ
AUX SET
BT AUDIO mode:
*6 *1
 VOL LV ADJ
BT SET
Phone mode (Non-calling mode):
*7
 VOL LV ADJ
PHONE SET
Phone mode (Calling mode):
*9
 VOICE MUTE
SPK SWITCH
*12
 END CALL
CALL SOUND
You can individually emphasize or weaken the volume level of
the current source to create your own tonal preference. The
setting values in Option mode and in SETUP mode are linkage.
Refer to "Setting the Source Volume Level" on page 15.
PLAY MODE can be selected in this mode. For details, refer to
"Playing MP3 Data (PLAY MODE)" on page 18.
Refer to "Setting the iPod Control" on page 27.
The setting items are the same as iPod setting in SETUP mode.
For details, refer to "iPod/iPhone Setting" on page 19.
AUX NAME can be selected in this mode. For details, refer to
"Setting the AUX SETUP Mode" on page 18.
FW VERSION can be selected in this mode. You can see the
current firmware version about BLUETOOTH by using this
setting.
CALL SOUND, SENDER ID, PB UPDATE, PB ORDER, AUTO
ANS, SEV NAME, SPEAKER SL and FW VERSION can be
selected in this mode. For details about these settings, refer to
"BLUETOOTH SETUP" on page 20.
The Hands free phone talk level, ring tone level and microphone
gain level can be adjusted by using this setting. The setting
values in Option mode and in SETUP mode are linkage. Refer to
"Setting the Source Volume Level" on page 15.
While calling, the call sound can be switched between the unit
and mobile phone by using this setting.
This operation can also be done by pressing BAND. Refer to
"Call Switching Operation" on page 25.
*1
 VOL LV ADJ
*1
*8
*10 *11
 CALL WAIT 
*13 *8
 VOL LV ADJ
While calling, and the Voice Mute is activated, the microphone
input will mute instantly and "VOICE MUTE" will blink. This
operation can also be done by pressing . Refer to "Muting
the microphone input quickly (Voice Mute)" on page 25.
If there is a waiting call, select this item to display the caller's
Name and waiting number (1 or 2). Press VIEW k and the
display will switch.
Refer to "Setting the BLUETOOTH sound quality" on page 21.
Select this item to hang up the call.
17
-EN