HAMPTON BAY HB1004C Owner's Manual page 15

tns_llation
Check all[sea, I s and plug any
r,ema[ning air ,gapswith a suitable
weatherproof caulk.
t4 If this is a casement window insta.]]a.tion,
proceed to ,Casement Window installation
ff not, stuff the Foam Seal Strip between the
verti_l sash and the window glass. (Fig 9)
t5 Att,ach the L Bracket with a Type 8 _rew_
(Fig,. 9)
)am seal strip
Fig, 9
i. fnstali[latiion procedure is the same as that describ_i in steps i through 11 and step 13 of the
Horizontal Sliding Window installation.
2. If the window opening is wider than 15-3/4 inches you wiUIneed to, iinstal] a filler panel. Make this
panel kom 3,/4 inch thick wood .and run it: the _ll len_h of the window..
Attach it securely to the w[nd,ow _ame and paint _ to protect lit from the weather:
3. Since styles and sizes of ,casement w[n,dows vary widely, it is advi_Ne to have the air con,dit[,oner
[n_all_ by someone skilled in this type of installation.
Line Cord Plug Use Wall Receptacle Power Supply
Use 15 AMP, time
delay fuse or circuit
breaker.
Standard 125V, 3-wire grounding
receptac:le rated 15A, 125V AC
Use of extension cords
B,ecause of _tenti.a] safety hazards, we strongly dis_urage the use of an extension cord... However,
if you wish to use an extension cord, use a CSA cert[fiediUL4isted 3wire (grounding) extensio, n
cord, rated 15A_ !25V
r _
Owne, s Manual 15