Rear Seat (Crew Cab); Seatback Latch (Rear Bench Seat Without Center Armrest); Seatback Latch (Rear Bench Seat With Center Armrest) - GMC SIERRA 1995 Manual

Rear Seat (Crew Cab)
You can adjust the seat by sliding the lever at the front of the seat toward the
seat support to unlock it. Then, slide the seat to where you want it. Release
the lever and try to move the seat with your body, to make sure the seat is
locked into place.
Seatback Latch (Rear Bench Seat Without Center
Armrest)
The rear seatback can be folded forward
to
let you reach the area behind it.
Your seatback will move back and forth freely, unless you come to a sudden
stop. Then, it will lock into place.
Seatback Latch (Rear Bench Seat With Center
Armrest)
The rear seatback folds forward to let you access the area behind it.
To fold a seatback
forward, pull this
lever forward and fold
the seatback forward.
To return the seatback to the upright position, just push the seatback
rearward until it latches.
After returning the seatback to its upright position, pull the seatback forward
to make sure it is locked.
A
CAUTION:
If the seatback isn't locked, it could move forward in a sudden
stop or crash. That could cause injury to the person sitting there.
Always press rearward on the seatback to be sure it is locked.
1-8