21,000 Miles (35 000 Km); 24,000 Miles (40 000 Km) - GMC SIERRA 1995 Manual

Table of Contents

Advertisement

Maintenance Schedule 1
-
Gasoline Engines With
Light Duty Emissions
21,000 Miles
( 3 5
000 km)
0
0
Change engine oil and filter (or every 3 months, whichever occurs
first). An Emissiot~ Control Service.
Lubricate the front suspension, king pin bushings, steering linkage,
transmission shift linkage, transfer case shift linkage, parking brake
cable guides, rear driveline center splines, front axle propshaft splines,
brake pedal springs and clutch pedal springs. Ball joints and king pin
bushings should not be lubricated unless their temperature is 10" F
(-12" C), or higher. When weather is cold, let the ball joints and king
pin bushings warm up before lubrication or they could be damaged.
Perform each of the listed lubrication service items at this mileage
interval (or every 6 months, whichever occurs first).
Check readfront axle fluid level and add fluid as needed. Check
constant velocity joints and axle seals for leaking.
*#:
DATE
SERVICED BY:
ACTUAL MILEAGE
24,000
Miles
(40
000 km)
0
Change engine oil and filter (or every 3 months, whichever occurs
first). A J ~ Emission Control Senice.
Lubricate the front suspension, king pin bushings, steering linkage,
transmission shift linkage, transfer case shift linkage, parking brake
cable guides, rear driveline center splines, front axle propshaft splines,
brake pedal springs and clutch pedal springs. Ball joints and king pin
bushings should not be lubricated unless their temperature is 10" F
(-1
2" C), or higher. When weather is cold, let the ball joints
and king
pin bushings warm up before lubrication or they could be damaged.
Perform each of the listed lubrication service items at this mileage
interval (or every 6 months, whichever occurs first).
Check readfront axle
fluid
level
and add fluid as
needed. Check
constant velocity joints and axle seals for leaking.
**
7-17

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents