Front Parkingnurn Signal Lamps With Sealed Beam Headlamps - GMC SIERRA 1995 Manual

Front Parkingnurn Signal Lamps with Sealed Beam
Headiamps
1. Remove the two
screws at the
inside edge of
the
parkinghrn
signal lamp
assembly.
2. Remove the lamp assembly by swinging it out from the inside edge and
sliding
it
out at the outside edge.
3. Squeeze the tab
on the side of the
lamp socket
while turning the
socket to the left.
4. Pull the socket
out of the lamp
assembly.
5 . Push in gently on the bulb, turn
it t o
the left and remove
it
from the
socket.
6. Put the new bulb in the socket, gently press in on the bulb and turn
it to
the right until it is tight.
7. Put the socket back into the lamp assembly and turn
it to
the right until
it locks.
8. Put the
parking/turn signal lamp
assembly back
inlo
the vehicle and
tighten the screws.
4-50