Rear Seats; Rear Seat Operation (Crew Cab) - GMC 2004 Canyon Owner's Manual

Hide thumbs Also See for 2004 Canyon:
Table of Contents

Advertisement

Rear Seats

Rear Seat Operation (Crew Cab)

If your vehicle is a crew cab, the rear seatback can be
folded forward. Before you can fold the rear seatback,
you need to unlatch the center safety belt buckle.
Use the following steps to lower one or both of the rear
seatbacks:
1. Insert a tool with a small tip into the slot to unlatch
the center position safety belt buckle. Then move
the belt to the side so it is not in the way.
3. Fold the seatback down.
2. Grasp the loop located
on the side of the
seatback you want to
fold and pull until
you hear a click.
4. Repeat Steps 2 and 3 to fold down the other
seatback.
CAUTION:
{
If the seatback isn't locked, it could move
forward in a sudden stop or crash. That could
cause injury to the person sitting there. Always
press rearward on the seatback to be sure it is
locked.
CAUTION:
{
A safety belt that is improperly routed, not
properly attached, or twisted won't provide
the protection needed in a crash. The person
wearing the belt could be seriously injured.
After raising the rear seatback, always check
to be sure that the safety belts are properly
routed and attached, and are not twisted.
1-9

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents