51,000 Miles (85 000 Km); 54,000 Miles (90 000 Km) - GMC SIERRA 1995 Manual

Table of Contents

Advertisement

Maintenance Schedule I
-
Gasoline Engines With
Light Duty Emissions
51,000 Miles (85 000 km)
El
Change engine oil and filter (or every 3 months, whichever occurs
first).
An
Emissitm Corztrol Senice.
0
Lubricate the front suspension, king pin bushings, steering linkage,
transmission shift linkage, transfer case shift linkage. parking brake
cable guides, rear driveline center splines, front axle propshaft splines,
brake pedal springs and clutch pedal springs. Ball joints and king pin
bushings should not be lubricated unless their temperature is 1 0 " F
(-1 2" C), or higher. When weather is cold, let the ball joints and king
pin bushings warm up before l~~brication or they could be damaged.
Perform each of the listed lubrication service items at this mileage
interval (or every 4 months. whichever occurs first).
0
Check rear/f'ront axle fluid level and add fluid as needed. Check
constant velocity joints and axle seals for leaking.:'::':
DATE
SERVICED BY:
ACTUAL MILEAGE
L
54,000 Miles (90 000 km)
Change engine oil and filter (or every 3 months, whichever occurs
first). An Emissiou CoFztwl Sel-\lice.
0
Lubricate the front suspension, king pin bushings, steering linkage.
transmission shift linkage, transfer case shift linkage, parking brake
cable guides, rear driveline center splines, front axle propshaft splines,
brake pedal springs and clutch pedal springs. Ball joints and king pin
bushings should not be lubricated unless their temperature is 10" F
(-1 2" Cj, or higher. When weather is cold, let the ball joints and king
pin bushings warm up before lubrication or they could be damaged.
Perform each of the listed lubrication service items at this mileage
interval
(or every 6
months. whichever occurs first).
(Corztinued)
7-24

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents