Fuel Indicator Meter; Reverse Indicator Lamp - DAELIM ET-300 - SERVICE MANUAL BIS Service Manual

FUEL INDICATOR METER

2
5
3
4
6
7

REVERSE INDICATOR LAMP

Your ATV is equipped with a fully automatic
C.V.T. transmission and has forward and
reverse gearing. A transmission shifting shaft
is located on the right hand side of your vehicle.
The shifter has three positions "F" Forward, "N"
Neutral and "R" Reverse.
The instrument panel has three lights that
correspond to the transmission shifter shaft
position.
The transmission must be placed in the "N"
(neutral - Green indicator Lamp) to start the
engine.
Slowly move the shifting lever to the desired
gear pausing slightly at the neutral position.
Once you have the gear selected increase the
5
throttle slowly until the transmission becomes
3
fully engaged and the vehicle starts moving in
the desired direction.
9
When shifting gears it is important that you
bring the vehicle to a complete stop with the
8
rear brake fully engaged and the enqine at idle.
If you attempt to shift the transmission with the
engine running above the idle speed the
engine will automatically shut down to protect
1
the transmission.
If this should happen you will need to turn off
the ignition switch to reset the safety lock out
before attempting to restart the enqine.