Fuel Indicator Meter; Reverse Indicator Lamp - DAELIM ET250 Owner's Manual

FUEL INDICATOR METER

FUEL INDICATOR METER
2
5
3
4
6
7

REVERSE INDICATOR LAMP

REVERSE INDICATOR LAMP
Your ATV is equipped with a fully automatic
C.V.T. transmission and has forward and
reverse gearing. A transmission shifting shaft
is located on the right hand side of your vehicle.
The shifter has three positions "F" Forward, "N"
Neutral and "R" Reverse.
The instrument panel has three lights that
correspond to the transmission shifter shaft
position.
The transmission must be placed in the "N"
(neutral - Green indicator Lamp) to start the
engine.
Slowly move the shifting lever to the desired
gear pausing slightly at the neutral position.
5
3
Once you have the gear selected increase the
throttle slowly until the transmission becomes
fully engaged and the vehicle starts moving in
9
the desired direction.
When shifting gears it is important that you
8
bring the vehicle to a complete stop with the
rear brake fully engaged and the enqine at idle.
If you attempt to shift the transmission with the
1
engine running above the idle speed the
engine will automatically shut down to protect
the transmission.
If this should happen you will need to turn off
the ignition switch to reset the safety lock out
before attempting to restart the enqine.