Symantec ALTIRIS INVENTORY SOLUTION 7.0 SP2 - V1.0 Manual page 122

122 Gathering baseline inventory
File Snapshot Editor options
File Configuration Editor options
Table 9-3
Tab Setting
Settings Reference System
Baseline name
Comments
Version
Rules Rule
Description
The name of the computer on which the
baseline snapshot was created. The file
compliance scan includes this
information in the snapshot file.
The name for the baseline file. You can
enter a maximum 175 characters in this
field. This setting helps you identify the
baseline file.
The description about the baseline file.
You can enter a maximum 225
characters in this field.
The version number of the baseline file.
You can enter a maximum 25
characters in this field. You must
update the version number every time
you change the file. The information
about last modified is displayed.
To add an exclusion filter, click Add. In
the New Rule dialog, enter at least one
value and click OK. If you enter
multiple values, all specified values
must match for a file to be excluded. To
populate the New Rule dialog with the
file s properties, click Get Resource
Information from File and specify the
file.
To edit an exclusion filter, select it in
the list and click Properties. To have
the compliance scan create an output
entry when it cannot find a file that
matches this rule, select Report if no
file matches this rule on the Snapshot
General tab.
To delete an exclusion filter from the
list, click Delete.