About Application Summary Data - Symantec ALTIRIS INVENTORY SOLUTION 7.0 SP2 - V1.0 Manual

About application summary data

Application metering stop events data (continued)
Table 8-7
Field
Total Run Time
Peak Memory
Average CPU
Each time a monitored application starts, the Application Metering plug-in records
the application s summary data. This data is stored on the managed computer
and sent to the CMDB at the end of the application monitoring period. If any data
was sent during the monitoring period, it is replaced at the end of the monitoring
period.
See "Managing application metering data"
See "About how application metering summary is sent"
The summary data is viewable in some of the Application metering reports.
See "Viewing application metering data"
Description
Time Total amount of time
in seconds that the
application was used during
the monitoring period .
When the application is
monitored, this value is
updated every 30 seconds.
Maximum amount of
memory in bytes used by the
application during the
monitoring period. When the
application is monitored, this
value is updated every 30
seconds.
Average CPU usage by the
application during the
monitoring period, where
100 equals 100 percent
usage. When the application
is monitored, this value is
updated every 30 seconds.
This information is not
available from managed
computers that are running
Windows 9x/Me.
on page 105.
on page 105.
Metering and denying applications
About application summary data
Example
188714
7921664
0.7652
on page 104.
101