Symantec ALTIRIS INVENTORY SOLUTION 7.0 SP2 - V1.0 Manual page 111

File Baseline task options (continued)
Table 9-1
Option
Compile a baseline snapshot
Gathering baseline inventory
File baseline task options
Description
You can capture and set the captured file settings
as the file baseline. This option helps you to create
a new file baseline setup.
You can use the following options:
Use local baseline configuration.
This option compiles a baseline snapshot using
the local_master.bls as the baseline
configuration. The compiled baseline
snapshot, local_master.bls is located on the
client computers at
%ProgramFiles%\Altiris\eXpress\Baseline.
Use custom baseline configuration.
This option lets you create a new baseline
configuration or select an existing custom
configuration.
You can create a new file by clicking Create a
baseline configuration with File Baseline
Configuration Editor.
See "File Configuration Editor dialog box"
on page 112.
The compiled baseline snapshot,
GivenBaselineConfiguratinName.bls,
is stored on the client computers at
%ProgramFiles%\Altiris\eXpress\Baseline.
To use the baseline snapshot for a compliance
scan, you must copy it to the Notification Server
computer in the following path:
InstallDir\Altiris\Notification
Server\NSCap\bin\Win32\X86\Inventory\Application
Management\FileBaselinePackage
You can also browse for an existing file.
111